基于Elmore模型的Steiner树问题的求解

建立了一种求解基于Elmore延迟模型的Steiner树问题的遗传算法。针对Steiner树问题的特点,在引入一种新的具有自适应性的杂交概率和变异概率的基础上,提出了面向Steinet树问题的遺传算法和一种构造染色体的新方法。提供了遗传算法的结构并讨论了遗传算子。分析了基于时间和空间的算法复杂性。     

含有纯滞后对象的控制方法

评述纯滞后对象控制的两种典型方法─—大林算法和纯滞后补偿法的原理、优缺点、设计要求及存在问题，并讨论了两者的联系。     

周期信号的孔径抖动及其去除

孔径抖动是指模数转换器采样周期之间出现的相位抖动 ,是由各时钟周期边沿出现时刻的不确定性导致的。当输入信号频率较高时孔径抖动是模数转换器信噪比下降的一个重要原因。对数据采集系统中的孔径抖动进行了仿真实验 ,介绍了反卷积算法 ,并利用反卷积算法对周期信号的孔径抖动进行了去除。仿真结果表明该方法是有效可行的     

Radar Imaging Based on Iterative Algorithms

It has long been realized that the problem of radar imaging is a special case of image reconstruction in which the data are incomplete and noisy. In other fields, iterative reconstruction algorithms have been used successfully to improve the image quality. This paper studies the application of iterative algorithms in radar imaging. A discrete model is first derived, and the iterative algorithms are then adapted to radar imaging. Although such algorithms are usually time consuming, this paper shows that, if the algorithms are appropriately simplified, it is possible to realize them even in real time. The efficiency of iterative algorithms is shown through computer simulations.     

AC=BD在微分方程中的应用

利用AC＝BD的思想，将变系数广义KdV方程约化成常微分方程，求出了KdV方程的Lax对。     

Petri网络在无控制交叉口延误分析中的应用

选用比较适合描述系统组织结构和动态行为的Petri网络模型对主路优先通行的无信号交叉口运行过程建立HSPN模型．在此基础上，结合间隙接受理论，对无控制交叉口进行平均延误分析探索，为交叉口仿真控制软件的研发奠定了算法基础。     

Subset threshold autoregression

We develop in this paper an efficient way to select the best subset threshold autoregressive model. The proposed method uses a stochastic search idea. Differing from most conventional approaches, our method does not require us to fix the delay or the threshold parameters in advance. By adopting the Markov chain Monte Carlo techniques, we can identify the best subset model from a very large of number of possible models, and at the same time estimate the unknown parameters. A simulation experiment shows that the method is very effective. In its application to the US unemployment rate, the stochastic search method successfully selects lag one as the time delay and five best models from more than 4000 choices. Copyright © 2003 John Wiley & Sons, Ltd.     

数字调节器的切换方法分析

本文在分析数字调节器控制算法的基础上，重点分析了数字调节器正常运行时各运行状态间的切换方法。     

一种利用绝对最小Lipshitz延拓的医学图像插值算法

提出一种基于最小Lipshitz延拓的图像插值半隐式算法,并用医学图像放大实验初步验证了算法的有效性.     

二叉分裂算法的随机路径长度

用泊松变换的方法研究了由二叉分裂算法所产生的随机树上的随机路径的长度,首次得到了关于其数学期望的确切表达式.在此基础上,对该期望的渐近性状进行了分析,证明了当被分裂的集合的大小n趋于无穷时,随机路径长度的期望具有log2n的阶.